597125 Hauck Trigger Lock Safety Gate for Doors and Stairs
The Trigger Lock Safety Gate is a children's gate made of powder-coated steel that can be used to securely limit your child's range of action. It is suitable for widths from 75 - 81 cm. For doors or stairs - this metal safety gate is suitable for openinings with a width from 75 cm to 81 cm; it can be used for several openings such as doors or stairs Pressure fit - this safety gate is fixed with four fixing screws by pressure, that means neither drilling nor screws are necessary; it leaves no trace once removed Childproof safety lock - the double safety lock prevents children from opening the door; adults can open it with one hand only in both direction, leaving one hand free for the little treasure Extendable - this safety gate for kids and pets can be extended up to 109 cm by using the hauck extensions of 7 cm and/or 14 cm Self-adjusting - i.e. tilting of the side part is corrected by tightening the fixing screws in the frame, thus enabling a secure position and parallel fixing of the side parts
• The mounting is done in no time. The gate can be clamped easily and individually by fixing screws between walls or door frames. Drilling is not necessary. • The gate can be opened with only one hand on either side. Thanks to the stoppers, the gate can be fixed on one or on both sides individually. • Thanks to the twofold manual locking mechanism, the safety gate always locks reliably into the childproof closure.
Special highlight: Thanks to the separately available extensions of 7 cm and/or 14 cm the gate can be adjusted to widths up to 109 cm and can thus be used as a door and stair gate.
• Pressure Fit, No Drilling • Extendable Up to 109 cm • Opens to Both Sides • Silver, 75-81 cm
Opening dimensions including extensions: • 82 - 88 cm = safety gate + extension 7 cm • 89 - 95 cm = safety gate + extension 2 x 7 cm or 1 x 14 cm • 96 - 102 cm = safety gate + extension 1 x 7 cm + 1 x 14 cm • 103 - 109 cm = safety gate + extension 2 x 14 cm
Note: This product is a self-adjusting gate. This means that the gate's initial misaligning/gap on the level of the locking mechanism is eliminated by tightening the locking screws in the frame.